.  
Control Electronic Security Globe . .
.

 

Control Electronic Security - local and international - license #EFB-831

Telephones:(786) 367 6090

(786) 299 1373

e-mail: 8730ces@gmail.com

 

About Us
Contact Us
Services
Tiger Teeth
Crash Gates


 

Tiger Teeth - Tire Shredders - Tiger Tooth - Parking Security - Parking Control Systems - Parking Equipment - Spike Systems
 

 

Unbeatable High Quality - Compare Prices Most of our competition offers 1/8" steel plates. Our Tiger Teeth are made with 1/4" steel plates.

12930 SW 133 Ct
Miami Florida.

Phones: 305.235.7133
                305.517.7931

FAX : 305.235.7142

Disclaimer: All sales are final.

Prices are not negotiable.

Official PayPal Seal
We accept

 
 

Tiger Teeth

1. Tiger Teeth Traffic Controllers - Surface mounted

Surface mount for rapid installation and speed bump effect.
36 inches (914 mm) long x 22 inches (558.8 mm) x 2.0 inches (50.8 mm) high. Overall height 4 inches (101.6 mm).
Nine electroplated Teeth in three-tooth replaceable modules.
Long life stainless steel torsion springs.
All welded steel frame.
155 pounds (70 Kg).
All of our units come with a Latch Down Key*

 MANUFACTURED USING 1/4" THICK COLD ROLLED STEEL FOR LASTING DURABILITY

Price per heavy duty and latchdown 3 Ft Section

 

Surface Mounted Tiger Teeth Drawings

Surface Mounted

click for larger view

Easily installed on existing roadwayNo excavating or asphalt cutting is requiredLow profile for smooth passageFabricated in 3-ft sections to customize your traffic lane widthAll welded construction1/4"  thick cold rolled steel for "lasting durability" Optional latch down version*

Click Here to Download TigerTeethSurfaceMountedDrawings.pdf

MANUFACTURED USING 1/4" THICK COLD ROLLED STEEL FOR LASTING DURABILITY


Tiger Teeth Picture- Surface Mount -

Tiger Teeth Surface Mount Picture

 

2.  Traffic Controllers - Flush mounted (Below Ground)

Standard Sabre Tooth controller flush installation 3 Feet (.90 cm) long x 7-1/2 inches (19.05 cm) x 5 inches (12.7cm) deep
9 electroplated Teeth
Long-life torsion springs
All welded steel frame
75 pounds (34 Kg)
Latch-down capability

 

Tiger_Flush

    Flush Mounted (Below Ground) Tiger Teeth Drawings

click for larger view

Easily installed to existing or newly constructed roadwayMinimal excavating to concrete or asphalt is requiredLow profile for smooth passageFabricated in 3-ft sections to customize your traffic lane widthAll welded construction1/4" thick hot rolled steel for lasting durabilityAll our Tiger Teeth have latch down capability

Click Here to Download TigerTeethBelowGroundDrawings.pdf

Click Here to Download InstallationGuidelinesTigerTeethBelowGround.pdf

* Call for more details of our Heavy Duty - Latch Down Tiger Teeth: (305) 499 93 96

 

3. Tiger Teeth Traffic Controllers - Motorized - Flush Mounted

Motorized Traffic control products are ideal for controlling most one way traffic. The traffic control spike set will allow vehicular traffic travel in one direction only.

Motorized Tiger Teeth - Flush Mounted (Below Ground)

The Automated / Hydraulic, flush mount traffic controller is designed to regulate the flow of traffic through a secured control point, while providing both a physical and visual barrier to approaching vehicles and preventing against unauthorized vehicles from either entering or exiting a secured control point.

Hydraulic Control Unit : 12” wide x 36” long x 30” tall

Tunnel Section : Standard 36” inch modules. Can be sized as required.

Traffic Control Modules : Lengths 36” inches, up to a maximum of 6 modules (18 feet) of control modules can be driven form a single hydraulic control unit .

Operating Time : Cycle to lower teeth 1 second, Cycle to raise teeth 1 second

Drive Configuration : Hydraulic power unit.

Power Requirements : ½ HP, 110V Single-phase 7A. The unit can be built to meet any local power requirement as to voltage, frequency and phase.

Finish : Epoxy urethane enamel (Red or Yellow)

Control Circuit : The machine is completely pre-wired requiring only the connection of the power feed and the control circuits. The circuits and power connections are terminated at the wire connector strips in the electrical control box located in the locked hydraulic control cabinet. The controls are pre-wired to accommodate a wide range of control options including: remote open and close from multiple locations; radio open and close; open by card reader, key switch or vehicle detector.

Documentation : Each machine is furnished with the following, Mechanical Installation Instructions, Electrical & Control Installation, Start Up Procedures, Trouble Shooting, Electrical, Mechanical Drawings

Options : Stop-Go Signal, Radio Receiver, Remote Radio Control, High Security Card Readers, Key, Battery Backup.

Shipping Weight : This machine is modularized for ease of shipping and handling.

    Motorized Tiger Teeth - Flush Mounted (Below Ground)

Motorized Tiger Teeth - Surface Mounted
click for larger view

 

Hydraulic Control Cabinet 175 lbs.
Drive Tunnel 36.0 inches 175 lbs.
Control Ramps 36.0 inches 220 lbs.

Click Here to Download Tiger Teeth Hydraulic Flush Mounted Specs

Tiger Teeth Traffic Controllers - Motorized - Flush Mounted or surface mounted
Contact us for price and details

Heavy Duty Galvanized : Contact us for price and details

*Kit is One Motor, 3 feet of tunnel, plus 6 foot Tiger Teeth, plus one guard button

 

4. Tiger Teeth Traffic Controllers - Motorized - Surface Mounted

Motorized Traffic control products are ideal for controlling most one way traffic. The traffic control spike set will allow vehicular traffic travel in one direction only.

    Motorized Tiger Teeth - Surface Mounted

The Automated / Hydraulic, surface mount traffic controller is designed to regulate the flow of traffic through a secured control point, while providing both a physical and visual barrier to approaching vehicles and preventing against unauthorized vehicles from either entering or exiting a secured control point.

Hydraulic Control Unit : 12” wide x 36” long x 30” tall

Tunnel Section : Standard 36” inch modules. Can be sized as required.

Traffic Control Modules : Lengths 36” inches, up to a maximum of 6 modules (18 feet) of control modules can be driven form a single hydraulic control unit .

Operating Time : Cycle to lower teeth 1 second, Cycle to raise teeth 1 second

Drive Configuration : Hydraulic power unit.

Power Requirements : ½ HP, 110V Single-phase 7A. The unit can be built to meet any local power requirement as to voltage, frequency and phase.

Finish : Epoxy urethane enamel (Red or Yellow)

Control Circuit : The machine is completely pre-wired requiring only the connection of the power feed and the control circuits. The circuits and power connections are terminated at the wire connector strips in the electrical control box located in the locked hydraulic control cabinet. The controls are pre-wired to accommodate a wide range of control options including: remote open and close from multiple locations; radio open and close; open by card reader, key switch or vehicle detector.

Documentation : Each machine is furnished with the following, Mechanical Installation Instructions, Electrical & Control Installation, Start Up Procedures, Trouble Shooting, Electrical, Mechanical Drawings

Options : Stop-Go Signal, Radio Receiver, Remote Radio Control, High Security Card Readers, Key, Battery Backup.

Shipping Weight : This machine is modularized for ease of shipping and handling.

    Motorized Tiger Teeth - Surface Mounted

Motorized Tiger Teeth - Surface Mounted
click for larger view

Hydraulic Control Cabinet 175 lbs.
Drive Tunnel 36.0 inches 175 lbs.
Control Ramps 36.0 inches 220 lbs.

Click Here to Download Tiger teeth Motorized Above Ground Specs and graphics

Tiger Teeth Traffic Controllers - Motorized - Flush Mounted or surface mounted
Contact us for price and details

Heavy Duty Galvanized : Contact us for price and details

*Kit is One Motor, 3 feet of tunnel, plus 6 foot Tiger Teeth, plus one guard button

 

Traffic  Warning Lights

Strongly recommended for motorized Tiger Teeth installations.

Material: The housing, door, and visor are injection molded of ultraviolet stabilized, pre-colored opaque polycarbonate.

Housing: One-piece unit with serrations in 5° increments at each end. Each housing has provisions for mounting two terminal blocks and attaching back plates. Housings may be fastened together to make multi-section signals.

Door: One-piece polycarbonate unit equipped with stainless steel hinge pins. Stainless steel thumbscrews hold the door against the housing.

Visor: The removable twist on visor is secured to the door with stainless steel hardware. Cut-way, tunnel and full tunnel circles are available.

Barrier Gates

Synchronized barrier gate for motorized tiger teeth( when spikes are down the arm is up and vice versa)

Illuminated Warning Signs for Tiger Teeth:

White High gloss two part polyurethane industrial finishDoubled face illuminated polycarbonate signagePhotocell controlled /dusk to dawn Flood Lamp included for traffic lane safety16 Gauge galvanized steel construction120 Volt rating

Price of sign package: $645.00